Tarmac driveway resurfacing in Nailsea

Tarmac resurfacing prices in Nailsea

Guide prices below are for Nailsea, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£26–£46 per m²
Example: 30 m² drive	£850–£1,550
Example: 50 m² drive	£1,300–£2,300
Example: 80 m² drive	£2,050–£3,700

As a 2026 guide in Nailsea, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 80 m² drive is roughly £2,050–£3,700. Guide only; the survey confirms a fixed price.

What the price covers

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Bond (tack) coat sprayed to glue the new layer to the old
New surface course, typically 25–40 mm, laid hot and rolled
Edges sealed and joints to existing surfaces cut neatly

Rules that apply in Nailsea

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Covering Nailsea

Survey cover and pricing for Nailsea. Nailsea is covered on our Somerset rounds, 18 miles from Bath.

Postcodes: BS48, BS49
Area: Somerset
Nearest towns: Portishead (3 miles), Clevedon (4 miles), Bristol (7 miles), Weston-super-Mare (11 miles)
Pricing: South West, about 3% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Portishead, Clevedon, Bristol, Weston-super-Mare, Keynsham.

Nailsea: common questions

How long will the work take at my Nailsea property?

Often 1–2 days for a typical drive. We book Nailsea surveys alongside other jobs in Somerset, and give you dates once the specification is agreed.

How much does tarmac resurfacing cost in Nailsea?

As a 2026 guide in Nailsea, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 80 m² drive is roughly £2,050–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Nailsea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Nailsea free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Other work in Nailsea

Questions about tarmac resurfacing jobs in Nailsea? Call, WhatsApp or use the form, and we'll talk it through.