Driveways and paths · Somerset

Tarmac driveway resurfacing in Keynsham

Homeowners in Keynsham ask us about tarmac resurfacing jobs for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

KEYNSHAM GUIDE£26–£46 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

Tarmac resurfacing prices in Keynsham

Guide prices below are for Keynsham, adjusted for the South West, where surfacing rates run about 3% above our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£26–£46 per m²
Example: 30 m² drive£850–£1,550
Example: 50 m² drive£1,300–£2,300
Example: 80 m² drive£2,050–£3,700

As a 2026 guide in Keynsham, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 50 m² drive is roughly £1,300–£2,300. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Keynsham

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What we do on tarmac resurfacing

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Plane or cut back at thresholds, kerbs and covers so levels still work
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled

Where we work in and around Keynsham

What applies in Keynsham. Keynsham is covered on our Somerset rounds, 6 miles from Bath.

Postcodes
BS31, BS30, BS14, BS15
Area
Somerset
Nearest towns
Bristol (5 miles), Bath (6 miles), Yate (9 miles), Nailsea (11 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Bristol, Bath, Yate, Nailsea, Portishead.

Keynsham: common questions

Which Keynsham postcodes do you cover?

We cover Keynsham including BS31, BS30, BS14, BS15, and nearby Bristol, Bath, Yate.

Tarmac resurfacing cost in Keynsham: what should I budget?

As a 2026 guide in Keynsham, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 50 m² drive is roughly £1,300–£2,300. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Keynsham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Keynsham free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Keynsham

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Keynsham.

Free survey for new surfacing

Tarmac driveway resurfacing in Keynsham: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price