Driveways and paths · North Yorkshire

Tarmac driveway resurfacing in Yarm

For tarmac resurfacing jobs in Yarm, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

YARM GUIDE£24–£43 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

Tarmac resurfacing prices in Yarm

Guide prices below are for Yarm, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£43 per m²
Example: 30 m² drive£790–£1,450
Example: 50 m² drive£1,200–£2,150
Example: 80 m² drive£1,900–£3,450

As a 2026 guide in Yarm, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,150. Guide only; the survey confirms a fixed price.

Do I need permission in Yarm?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What is included in tarmac resurfacing?

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • Edges sealed and joints to existing surfaces cut neatly

Yarm: the local details

What applies in Yarm. Yarm is covered on our North Yorkshire rounds, 39 miles from York.

Postcodes
TS16, TS15
Area
North Yorkshire
Nearest towns
Thornaby (3 miles), Stockton-on-Tees (5 miles), Billingham (6 miles), Middlesbrough (7 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Thornaby, Stockton-on-Tees, Billingham, Middlesbrough, Darlington.

The build-up we price

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Yarm: common questions

Will someone visit before I get a fixed price in Yarm?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Yarm?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Yarm postcodes do you cover?

We cover Yarm including TS16, TS15, and nearby Thornaby, Stockton-on-Tees, Billingham.

Tarmac resurfacing cost in Yarm: what should I budget?

As a 2026 guide in Yarm, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 50 m² drive is roughly £1,200–£2,150. Edging, drainage and a dropped kerb are priced separately where needed.

Other work in Yarm

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Yarm.

Free survey for new surfacing

Tarmac driveway resurfacing in Yarm: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price