Tarmac driveway resurfacing in Billingham
Homeowners in Billingham ask us about tarmac resurfacing jobs for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

How much should I budget in Billingham?
Guide prices below are for Billingham, adjusted for the North East, where surfacing rates run about 7% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tarmac resurfacing over a sound existing base | £23–£42 per m² |
| Example: 30 m² drive | £770–£1,400 |
| Example: 50 m² drive | £1,150–£2,100 |
| Example: 80 m² drive | £1,850–£3,350 |
As a 2026 guide in Billingham, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 30 m² drive is roughly £770–£1,400. Guide only; the survey confirms a fixed price.
Covering Billingham
Survey cover and pricing for Billingham. We reach Billingham on our County Durham survey days; Darlington is 11 miles away.
- Postcodes
- TS20, TS23, TS22
- Area
- County Durham
- Nearest towns
- Stockton-on-Tees (2 miles), Middlesbrough (2 miles), Thornaby (4 miles), Yarm (6 miles)
- Pricing
- North East, about 7% below our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Stockton-on-Tees, Middlesbrough, Thornaby, Yarm, Hartlepool.
How it is built
Do I need permission in Billingham?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
What we do on tarmac resurfacing
Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.
- Cut out and patch failed areas before overlaying
- Plane or cut back at thresholds, kerbs and covers so levels still work
- Bond (tack) coat sprayed to glue the new layer to the old
- New surface course, typically 25–40 mm, laid hot and rolled
- Edges sealed and joints to existing surfaces cut neatly
Your questions answered
How long does tarmac resurfacing take in Billingham?
Often 1–2 days for a typical drive. We book Billingham surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.
Is the survey in Billingham free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Tarmac resurfacing cost in Billingham: what should I budget?
As a 2026 guide in Billingham, tarmac resurfacing work runs at about £23–£42 per m² including VAT, so a 30 m² drive is roughly £770–£1,400. Edging, drainage and a dropped kerb are priced separately where needed.
Do you cover all of Billingham?
We cover Billingham including TS20, TS23, TS22, and nearby Stockton-on-Tees, Middlesbrough, Thornaby.
Other work in Billingham
- Tar and chip driveways
- New tarmac driveways
- Permeable tarmac driveways
- Car park and yard repairs
- Tarmac paths and footpaths
- Car park resurfacing
- Everything in Billingham
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Billingham.
Tarmac driveway resurfacing in Billingham: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED