Tarmac driveway resurfacing in Speke

What does tarmac resurfacing cost in Speke?

These Speke guide prices reflect rates in the North West, about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£24–£44 per m²
Example: 30 m² drive	£800–£1,450
Example: 50 m² drive	£1,200–£2,200
Example: 80 m² drive	£1,950–£3,500

As a 2026 guide in Speke, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Speke

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What is included in tarmac resurfacing?

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

Survey of the existing base: sinking, rutting, loose edges and drainage
Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Weed treatment and a clean surface
New surface course, typically 25–40 mm, laid hot and rolled

Speke: the local details

Survey cover and pricing for Speke. We cover Speke by grouping surveys with nearby Merseyside jobs; Liverpool is 7 miles away.

Postcodes: L24
Area: Merseyside
Nearest towns: Halewood (1 mile), Garston (2 miles), Runcorn (5 miles), Widnes (5 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Halewood, Garston, Runcorn, Widnes, Huyton.

Questions about tarmac resurfacing jobs in Speke

Tarmac resurfacing cost in Speke: what should I budget?

As a 2026 guide in Speke, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Speke?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Speke?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Speke?

Often 1–2 days for a typical drive. We book Speke surveys alongside other jobs in Merseyside, and give you dates once the specification is agreed.

Other work in Speke

Tell us what you have in mind for Speke and we'll book a survey and put the specification in writing.