Driveways and paths · Merseyside

Tarmac driveway resurfacing in Garston

Planning tarmac resurfacing in Garston? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

GARSTON GUIDE£24–£44 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

What does tarmac resurfacing cost in Garston?

For Garston, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£24–£44 per m²
Example: 30 m² drive£800–£1,450
Example: 50 m² drive£1,200–£2,200
Example: 80 m² drive£1,950–£3,500

As a 2026 guide in Garston, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Guide only; the survey confirms a fixed price.

What the price covers

Tarmac resurfacing, or an overlay, means cleaning and repairing an existing drive, spraying a bond coat and laying a new surface course of about 25–40 mm on top, without digging out the base.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Where we work in and around Garston

What applies in Garston. Smaller towns such as Garston are surveyed alongside nearby jobs in Merseyside.

Postcodes
L19, L18
Area
Merseyside
Nearest towns
Speke (2 miles), Halewood (3 miles), Ellesmere Port (4 miles), Bebington (5 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Close to Garston: Speke, Halewood, Ellesmere Port, Bebington, Huyton.

Planning and kerb rules for Garston

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

The build-up we price

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Garston: common questions

What is the price of tarmac resurfacing in Garston?

As a 2026 guide in Garston, tarmac resurfacing work runs at about £24–£44 per m² including VAT, so a 80 m² drive is roughly £1,950–£3,500. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Garston?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Garston free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my Garston property?

Often 1–2 days for a typical drive. We book Garston surveys alongside other jobs in Merseyside, and give you dates once the specification is agreed.

Also in Garston

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Garston.

Free survey for new surfacing

Tarmac driveway resurfacing in Garston: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price