Driveways and paths · Greater London

Tarmac driveway resurfacing in Brixton

Tarmac driveway resurfacing in Brixton start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

BRIXTON GUIDE£30–£54 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Brixton?

For Brixton, we apply the London rate, about 20% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£30–£54 per m²
Example: 30 m² drive£990–£1,800
Example: 50 m² drive£1,500–£2,700
Example: 80 m² drive£2,400–£4,300

As a 2026 guide in Brixton, tarmac resurfacing work runs at about £30–£54 per m² including VAT, so a 50 m² drive is roughly £1,500–£2,700. Guide only; the survey confirms a fixed price.

What the price covers

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Weed treatment and a clean surface
  • Bond (tack) coat sprayed to glue the new layer to the old
  • Edges sealed and joints to existing surfaces cut neatly

Brixton: the local details

Brixton at a glance. Brixton is one of the bigger places we cover in Greater London, so survey slots come round regularly.

Postcodes
SW9, SE24, SE5, SW2
Area
Greater London
Nearest towns
Peckham (2 miles), Battersea (2 miles), Westminster (3 miles), Streatham (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Peckham, Battersea, Westminster, Streatham, Chelsea.

Rules that apply in Brixton

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

How it is built

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Brixton: common questions

Can I get a free survey in Brixton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Brixton?

We cover Brixton including SW9, SE24, SE5, SW2, and nearby Peckham, Battersea, Westminster.

How quickly can work start in Brixton?

Often 1–2 days for a typical drive. We book Brixton surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Do I need permission for tarmac resurfacing in Brixton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Brixton

Ready for a price in Brixton? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac driveway resurfacing in Brixton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price