Driveways and paths · Greater London

Permeable tarmac driveways in Brixton

Homeowners in Brixton ask us about permeable tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

BRIXTON GUIDE£96–£150 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

What does a permeable tarmac driveway cost in Brixton?

Guide prices below are for Brixton, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£96–£150 per m²
Example: 30 m² drive£3,150–£4,950
Example: 50 m² drive£4,800–£7,500
Example: 80 m² drive£7,700–£12,000

As a 2026 guide in Brixton, permeable tarmac driveway work runs at about £96–£150 per m² including VAT, so a 50 m² drive is roughly £4,800–£7,500. Guide only; the survey confirms a fixed price.

Where we work in and around Brixton

The key facts for Brixton. As one of the larger towns in Greater London, Brixton sees regular survey visits.

Postcodes
SW9, SE24, SE5, SW2
Area
Greater London
Nearest towns
Peckham (2 miles), Battersea (2 miles), Westminster (3 miles), Streatham (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Peckham, Battersea, Westminster, Streatham, Chelsea.

What is included in a permeable tarmac driveway?

Open-graded porous asphalt on a deep permeable stone base, so rain soaks through on site.

  • Ground check: how fast does the soil drain?
  • Dig out deeper than a standard drive to fit the storage layer
  • Geotextile separating layer on the formation
  • Open-graded permeable sub-base, often Type 3 or 4/20 stone
  • Edge restraint that does not block the flow

Planning and kerb rules for Brixton

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Questions about permeable tarmac driveways in Brixton

Will someone visit before I get a fixed price in Brixton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a permeable tarmac driveway take in Brixton?

Usually 3–5 working days. We book Brixton surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

What approvals apply in Brixton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Brixton?

We cover Brixton including SW9, SE24, SE5, SW2, and nearby Peckham, Battersea, Westminster.

Other work in Brixton

Tell us what you have in mind for Brixton and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Permeable tarmac driveways in Brixton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price