Driveways and paths · Dorset

Tarmac driveway resurfacing in Ferndown

Homeowners in Ferndown ask us about tarmac resurfacing jobs for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

FERNDOWN GUIDE£26–£46 per m² inc VAT
Hot tarmac being spread with a lute rake on a driveway, typical of tarmac resurfacing work

How much should I budget in Ferndown?

Local guide rates for Ferndown (the South West, about 3% above our UK midpoint):

ItemGuide price (inc VAT)
Tarmac resurfacing over a sound existing base£26–£46 per m²
Example: 30 m² drive£850–£1,550
Example: 50 m² drive£1,300–£2,300
Example: 80 m² drive£2,050–£3,700

As a 2026 guide in Ferndown, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 30 m² drive is roughly £850–£1,550. Guide only; the survey confirms a fixed price.

What is included in tarmac resurfacing?

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

  • Survey of the existing base: sinking, rutting, loose edges and drainage
  • Cut out and patch failed areas before overlaying
  • Weed treatment and a clean surface
  • New surface course, typically 25–40 mm, laid hot and rolled
  • Edges sealed and joints to existing surfaces cut neatly

Layer by layer

New surface course25–40 mm AC 6 or AC 10Bond coatbitumen emulsion tack coatExisting driverepaired where failedExisting basemust be soundINDICATIVE CROSS-SECTION · NOT TO SCALE

Ferndown: the local details

What applies in Ferndown. Smaller towns such as Ferndown are surveyed alongside nearby jobs in Dorset.

Postcodes
BH22, BH31, BH24
Area
Dorset
Nearest towns
Wimborne Minster (4 miles), Bournemouth (6 miles), Christchurch (7 miles), Poole (7 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Wimborne Minster, Bournemouth, Christchurch, Poole, New Milton.

Rules that apply in Ferndown

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Ferndown: common questions

Do you work in my part of Ferndown?

We cover Ferndown including BH22, BH31, BH24, and nearby Wimborne Minster, Bournemouth, Christchurch.

Are there planning or highway rules in Ferndown?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of tarmac resurfacing in Ferndown?

As a 2026 guide in Ferndown, tarmac resurfacing work runs at about £26–£46 per m² including VAT, so a 30 m² drive is roughly £850–£1,550. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Ferndown?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Ferndown

Ready for a price in Ferndown? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac driveway resurfacing in Ferndown: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price