Driveways and paths · Dorset

New tarmac driveways in Ferndown

Homeowners in Ferndown ask us about new tarmac driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

FERNDOWN GUIDE£62–£98 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Ferndown

For Ferndown, we apply the South West rate, about 3% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£62–£98 per m²
Example: 30 m² drive£2,050–£3,250
Example: 50 m² drive£3,100–£4,900
Example: 80 m² drive£4,950–£7,850

As a 2026 guide in Ferndown, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 50 m² drive is roughly £3,100–£4,900. Guide only; the survey confirms a fixed price.

Ferndown: the local details

Survey cover and pricing for Ferndown. Smaller towns such as Ferndown are surveyed alongside nearby jobs in Dorset.

Postcodes
BH22, BH31, BH24
Area
Dorset
Nearest towns
Wimborne Minster (4 miles), Bournemouth (6 miles), Christchurch (7 miles), Poole (7 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Wimborne Minster, Bournemouth, Christchurch, Poole, New Milton.

Do I need permission in Ferndown?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Ferndown: common questions

Are there planning or highway rules in Ferndown?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a new tarmac driveway cost in Ferndown?

As a 2026 guide in Ferndown, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 50 m² drive is roughly £3,100–£4,900. Edging, drainage and a dropped kerb are priced separately where needed.

How long will the work take at my Ferndown property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Ferndown surveys alongside other jobs in Dorset, and give you dates once the specification is agreed.

Do you cover all of Ferndown?

We cover Ferndown including BH22, BH31, BH24, and nearby Wimborne Minster, Bournemouth, Christchurch.

Also in Ferndown

Ready for a price in Ferndown? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Ferndown: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price