Tarmac driveway resurfacing in Mold

Tarmac resurfacing prices in Mold

These Mold guide prices reflect rates in Wales, about 5% below our UK midpoint.

Item	Guide price (inc VAT)
Tarmac resurfacing over a sound existing base	£24–£43 per m²
Example: 30 m² drive	£780–£1,400
Example: 50 m² drive	£1,200–£2,150
Example: 80 m² drive	£1,900–£3,400

As a 2026 guide in Mold, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 80 m² drive is roughly £1,900–£3,400. Guide only; the survey confirms a fixed price.

Do I need permission in Mold?

In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold. A vehicle crossing over the footway is a separate approval, from the council as highway authority.

What the price covers

A new tack-coated surface course over a drive whose base is still sound: less digging, lower cost.

Survey of the existing base: sinking, rutting, loose edges and drainage
Cut out and patch failed areas before overlaying
Plane or cut back at thresholds, kerbs and covers so levels still work
Bond (tack) coat sprayed to glue the new layer to the old
New surface course, typically 25–40 mm, laid hot and rolled

How it is built

Covering Mold

What applies in Mold. We cover Mold by grouping surveys with nearby Clwyd jobs; Wrexham is 10 miles away.

Postcodes: CH7
Area: Clwyd
Nearest towns: Buckley (2 miles), Deeside (5 miles), Hawarden (5 miles), Flint (5 miles)
Pricing: Wales, about 5% below our UK midpoint
Kerb approvals: The council

Nearby, we work in Buckley, Deeside, Hawarden, Flint, Wrexham.

Mold: common questions

Is the survey in Mold free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Mold postcodes do you cover?

We cover Mold including CH7, and nearby Buckley, Deeside, Hawarden.

Do I need permission for tarmac resurfacing in Mold?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

How much does tarmac resurfacing cost in Mold?

As a 2026 guide in Mold, tarmac resurfacing work runs at about £24–£43 per m² including VAT, so a 80 m² drive is roughly £1,900–£3,400. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Mold

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Mold.