Driveways and paths · Clwyd

Tarmac paths and footpaths in Mold

Tarmac paths and footpaths in Mold start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

MOLD GUIDE£52–£86 per m² inc VAT
Tarmac garden path with timber edging curving to a shed, typical of tarmac path work

What does a tarmac path cost in Mold?

These Mold guide prices reflect rates in Wales, about 5% below our UK midpoint.

ItemGuide price (inc VAT)
Tarmac garden path or footpath, hand-laid£52–£86 per m²
Example: 10 m² path£630–£1,050
Example: 20 m² path£1,150–£1,900
Example: 40 m² path£2,100–£3,400

As a 2026 guide in Mold, tarmac path work runs at about £52–£86 per m² including VAT, so a 10 m² path is roughly £630–£1,050. Guide only; the survey confirms a fixed price.

What the price covers

Garden paths, side passages and footpaths in hot-laid tarmac, edged with timber, kerbs or blocks.

  • Excavation to about 150–180 mm with spoil removed
  • MOT Type 1 base, about 100 mm, compacted
  • Timber, kerb or block edging on both sides
  • Binder and surface course laid hot by hand and rolled
  • Gentle cross-fall so water runs off to the border

Layer by layer

Surface courseabout 20 mm AC 6Binder courseabout 40–50 mm AC 20Baseabout 100 mm MOT Type 1Edgestimber, kerbs or blocksINDICATIVE CROSS-SECTION · NOT TO SCALE

Mold: the local details

Survey cover and pricing for Mold. Smaller towns such as Mold are surveyed alongside nearby jobs in Clwyd.

Postcodes
CH7
Area
Clwyd
Nearest towns
Buckley (2 miles), Deeside (5 miles), Hawarden (5 miles), Flint (5 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

We also cover nearby Buckley, Deeside, Hawarden, Flint, Wrexham.

Planning and kerb rules for Mold

Repairs, paths and edging work rarely need planning permission. In Wales, a new hard surface in front of a house is permitted development only if it is porous or drains to a permeable area within the property; repairing or replacing up to 5 m² of existing hardstanding is allowed without meeting that condition. Separately, since January 2019, construction covering 100 m² or more that affects drainage generally needs approval from the council's SuDS Approving Body (SAB) before work starts, even where planning permission is not needed. Larger drives, shared surfaces and car parks often reach that threshold.

Questions about tarmac paths in Mold

How long will the work take at my Mold property?

Often 1–2 days. We book Mold surveys alongside other jobs in Clwyd, and give you dates once the specification is agreed.

Is the survey in Mold free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Mold?

We cover Mold including CH7, and nearby Buckley, Deeside, Hawarden.

What approvals apply in Mold?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Also in Mold

Questions about tarmac paths in Mold? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Tarmac paths and footpaths in Mold: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price