Driveways and paths · South Yorkshire

Tarmac driveway repairs in Maltby

Planning a tarmac driveway repair in Maltby? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

MALTBY GUIDE£140–£380 each inc VAT
Square hot tarmac patch repair with sealed joints in an older drive, typical of tarmac driveway repair work

Tarmac driveway repair prices in Maltby

Local guide rates for Maltby (Yorkshire and the Humber, about 4% below our UK midpoint):

ItemGuide price (inc VAT)
Pothole or small patch repair, cut out and re-laid£140–£380 each
Crack sealing on a domestic drive£100–£290 per job
Edge repair with new edge restraint£290–£770 per job

As a 2026 guide in Maltby, expect about £140–£380 each including VAT. Guide only; the survey confirms a fixed price.

What is included in a tarmac driveway repair?

A proper tarmac repair cuts out the damaged area in a neat square, digs out any failed stone beneath, rebuilds and compacts the base, bonds the edges and lays new hot tarmac flush with the drive.

  • Saw-cut the damaged area square, back to sound tarmac
  • Dig out and replace failed sub-base, compact in layers
  • Hot binder and surface course laid flush and rolled
  • Joints sealed to stop water getting under the patch
  • Edge restraint replaced where the side has crumbled

Planning and kerb rules for Maltby

Repairs, paths and edging work rarely need planning permission. In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water.

Layer by layer

Repair surfacehot AC 6 to match the driveRepair binderhot AC 20 where depth allowsBaserebuilt and compactedJointssealedINDICATIVE CROSS-SECTION · NOT TO SCALE

Maltby: the local details

Maltby at a glance. Smaller towns such as Maltby are surveyed alongside nearby jobs in South Yorkshire.

Postcodes
S66, DN11
Area
South Yorkshire
Nearest towns
Dinnington (3 miles), Conisbrough (5 miles), Rotherham (7 miles), Mexborough (7 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Dinnington, Conisbrough, Rotherham, Mexborough, Rawmarsh.

Your questions answered

What is the price of a tarmac driveway repair in Maltby?

As a 2026 guide in Maltby, expect about £140–£380 each including VAT. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Maltby?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Maltby?

Usually half a day to a day. We book Maltby surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

Are there planning or highway rules in Maltby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Maltby

Ready for a price in Maltby? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tarmac driveway repairs in Maltby: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price