Driveways and paths · West Yorkshire

Tar and chip driveways in Pontefract

If you are weighing up tar and chip driveways in Pontefract, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

PONTEFRACT GUIDE£43–£72 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Pontefract?

For Pontefract, we apply the Yorkshire and the Humber rate, about 4% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£72 per m²
Example: 50 m² drive£2,150–£3,600
Example: 100 m² drive£4,300–£7,200
Example: 200 m² drive£8,200–£13,700

As a 2026 guide in Pontefract, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Guide only; the survey confirms a fixed price.

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Pontefract?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in

Pontefract: the local details

Pontefract at a glance. Pontefract sits 12 miles from Leeds, within our regular West Yorkshire cover.

Postcodes
WF8, WF7, WF11
Area
West Yorkshire
Nearest towns
Castleford (3 miles), Kippax (6 miles), South Elmsall (7 miles), Wakefield (8 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

Close to Pontefract: Castleford, Kippax, South Elmsall, Wakefield, Adwick le Street.

Your questions answered

Which Pontefract postcodes do you cover?

We cover Pontefract including WF8, WF7, WF11, and nearby Castleford, Kippax, South Elmsall.

How long does a tar and chip driveway take in Pontefract?

Often 1–3 days depending on base work. We book Pontefract surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

Do I need permission for a tar and chip driveway in Pontefract?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a tar and chip driveway in Pontefract?

As a 2026 guide in Pontefract, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Pontefract

Tell us what you have in mind for Pontefract and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Tar and chip driveways in Pontefract: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price