Tar and chip driveways in Wakefield

What does a tar and chip driveway cost in Wakefield?

Guide prices below are for Wakefield, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£43–£72 per m²
Example: 50 m² drive	£2,150–£3,600
Example: 100 m² drive	£4,300–£7,200
Example: 200 m² drive	£8,200–£13,700

As a 2026 guide in Wakefield, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Guide only; the survey confirms a fixed price.

Where we work in and around Wakefield

Wakefield at a glance. We cover Wakefield as part of our regular West Yorkshire rounds.

Postcodes: WF1, WF2, WF4, WF3
Area: West Yorkshire
Nearest towns: Ossett (3 miles), Dewsbury (5 miles), Morley (6 miles), Batley (6 miles)
Pricing: Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals: The highway authority

Close to Wakefield: Ossett, Dewsbury, Morley, Batley, Castleford.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Do I need permission in Wakefield?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Wakefield: common questions

How long will the work take at my Wakefield property?

Often 1–3 days depending on base work. We book Wakefield surveys alongside other jobs in West Yorkshire, and give you dates once the specification is agreed.

What approvals apply in Wakefield?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Tar and chip driveway cost in Wakefield: what should I budget?

As a 2026 guide in Wakefield, tar and chip driveway work runs at about £43–£72 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,200. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Wakefield free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Wakefield

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Wakefield.