Tar and chip driveways in Newcastle-under-Lyme
Homeowners in Newcastle-under-Lyme ask us about tar and chip driveways for the same reason: a surface that stays flat, drains properly and still looks tidy in ten years. That comes down to the build underneath.

Tar and chip driveway prices in Newcastle-under-Lyme
Guide prices below are for Newcastle-under-Lyme, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £45–£75 per m² |
| Example: 50 m² drive | £2,250–£3,750 |
| Example: 100 m² drive | £4,500–£7,500 |
| Example: 200 m² drive | £8,550–£14,250 |
As a 2026 guide in Newcastle-under-Lyme, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 100 m² drive is roughly £4,500–£7,500. Guide only; the survey confirms a fixed price.
Layer by layer
Newcastle-under-Lyme: the local details
What applies in Newcastle-under-Lyme. Newcastle-under-Lyme is one of the bigger places we cover in Staffordshire, so survey slots come round regularly.
- Postcodes
- ST55, ST5
- Area
- Staffordshire
- Nearest towns
- Stoke-on-Trent (2 miles), Kidsgrove (6 miles), Biddulph (8 miles), Crewe (11 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
Close to Newcastle-under-Lyme: Stoke-on-Trent, Kidsgrove, Biddulph, Crewe, Congleton.
What we do on a tar and chip driveway
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Rolled to bed the stones in
- Loose surplus chippings swept up after a few days
Planning and kerb rules for Newcastle-under-Lyme
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Questions about tar and chip driveways in Newcastle-under-Lyme
Tar and chip driveway cost in Newcastle-under-Lyme: what should I budget?
As a 2026 guide in Newcastle-under-Lyme, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 100 m² drive is roughly £4,500–£7,500. Edging, drainage and a dropped kerb are priced separately where needed.
Do you cover all of Newcastle-under-Lyme?
We cover Newcastle-under-Lyme including ST55, ST5, and nearby Stoke-on-Trent, Kidsgrove, Biddulph.
How long will the work take at my Newcastle-under-Lyme property?
Often 1–3 days depending on base work. We book Newcastle-under-Lyme surveys alongside other jobs in Staffordshire, and give you dates once the specification is agreed.
Are there planning or highway rules in Newcastle-under-Lyme?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Other work in Newcastle-under-Lyme
- Permeable tarmac driveways
- Car park surfacing
- New tarmac driveways
- Tarmac driveway repairs
- Tarmac paths and footpaths
- Private and access road surfacing
- Everything in Newcastle-under-Lyme
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Newcastle-under-Lyme.
Tar and chip driveways in Newcastle-under-Lyme: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED