Tar and chip driveways in Witney

How much should I budget in Witney?

Local guide rates for Witney (the South East, about 10% above our UK midpoint):

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£50–£82 per m²
Example: 50 m² drive	£2,500–£4,100
Example: 100 m² drive	£4,950–£8,250
Example: 200 m² drive	£9,400–£15,700

As a 2026 guide in Witney, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Guide only; the survey confirms a fixed price.

Where we work in and around Witney

Witney at a glance. We cover Witney by grouping surveys with nearby Oxfordshire jobs; Oxford is 10 miles away.

Postcodes: OX28, OX29
Area: Oxfordshire
Nearest towns: Carterton (5 miles), Oxford (10 miles), Abingdon (12 miles), Didcot (16 miles)
Pricing: South East, about 10% above our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Carterton, Oxford, Abingdon, Didcot, Bicester.

Rules that apply in Witney

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Layer by layer

Witney: common questions

Can I get a free survey in Witney?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tar and chip driveway cost in Witney?

As a 2026 guide in Witney, tar and chip driveway work runs at about £50–£82 per m² including VAT, so a 100 m² drive is roughly £4,950–£8,250. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Witney?

We cover Witney including OX28, OX29, and nearby Carterton, Oxford, Abingdon.

Are there planning or highway rules in Witney?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

More we do in Witney

Ready for a price in Witney? Use the guide price tool or send the form, and we'll arrange a visit.