Driveways and paths · Nottinghamshire

Tar and chip driveways in Newark-on-Trent

Tar and chip driveways in Newark-on-Trent start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

NEWARK-ON-TRENT GUIDE£44–£74 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Newark-on-Trent

These Newark-on-Trent guide prices reflect rates in the East Midlands, about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£74 per m²
Example: 50 m² drive£2,200–£3,700
Example: 100 m² drive£4,400–£7,350
Example: 200 m² drive£8,400–£13,950

As a 2026 guide in Newark-on-Trent, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Guide only; the survey confirms a fixed price.

What we do on a tar and chip driveway

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Second coat where a double dressing is specified

Rules that apply in Newark-on-Trent

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Covering Newark-on-Trent

What applies in Newark-on-Trent. Newark-on-Trent sits 16 miles from Nottingham, within our regular Nottinghamshire cover.

Postcodes
NG24, NG23
Area
Nottinghamshire
Nearest towns
Arnold (14 miles), Nottingham (16 miles), West Bridgford (16 miles), Hucknall (16 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

Close to Newark-on-Trent: Arnold, Nottingham, West Bridgford, Hucknall, Mansfield.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tar and chip driveways in Newark-on-Trent

Do you work in my part of Newark-on-Trent?

We cover Newark-on-Trent including NG24, NG23, and nearby Arnold, Nottingham, West Bridgford.

How long will the work take at my Newark-on-Trent property?

Often 1–3 days depending on base work. We book Newark-on-Trent surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.

Is the survey in Newark-on-Trent free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a tar and chip driveway cost in Newark-on-Trent?

As a 2026 guide in Newark-on-Trent, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Newark-on-Trent

Ready for a price in Newark-on-Trent? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

Tar and chip driveways in Newark-on-Trent: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price