Driveways and paths · Mid Glamorgan

Tar and chip driveways in Tonyrefail

For tar and chip driveways in Tonyrefail, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

TONYREFAIL GUIDE£43–£71 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Tonyrefail?

These Tonyrefail guide prices reflect rates in Wales, about 5% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£71 per m²
Example: 50 m² drive£2,150–£3,550
Example: 100 m² drive£4,300–£7,100
Example: 200 m² drive£8,100–£13,550

As a 2026 guide in Tonyrefail, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,100. Guide only; the survey confirms a fixed price.

Covering Tonyrefail

Survey cover and pricing for Tonyrefail. We cover Tonyrefail by grouping surveys with nearby Mid Glamorgan jobs; Rhondda is 5 miles away.

Postcodes
CF39
Area
Mid Glamorgan
Nearest towns
Tonypandy (3 miles), Llantrisant (4 miles), Pontypridd (4 miles), Pencoed (5 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

Nearby, we work in Tonypandy, Llantrisant, Pontypridd, Pencoed, Rhondda.

Planning and kerb rules for Tonyrefail

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Any new or widened crossing over the pavement needs approval from the council as highway authority.

How it is built

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Rolled to bed the stones in
  • Second coat where a double dressing is specified

Tonyrefail: common questions

Is the survey in Tonyrefail free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Tonyrefail?

We cover Tonyrefail including CF39, and nearby Tonypandy, Llantrisant, Pontypridd.

Do I need permission for a tar and chip driveway in Tonyrefail?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

Tar and chip driveway cost in Tonyrefail: what should I budget?

As a 2026 guide in Tonyrefail, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 100 m² drive is roughly £4,300–£7,100. Edging, drainage and a dropped kerb are priced separately where needed.

Also in Tonyrefail

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Tonyrefail.

Free survey for new surfacing

Tar and chip driveways in Tonyrefail: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price