Driveways and paths · Mid Glamorgan

Tar and chip driveways in Rhondda

A good tar and chip driveway in Rhondda looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

RHONDDA GUIDE£43–£71 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Rhondda?

These Rhondda guide prices reflect rates in Wales, about 5% below our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£43–£71 per m²
Example: 50 m² drive£2,150–£3,550
Example: 100 m² drive£4,300–£7,100
Example: 200 m² drive£8,100–£13,550

As a 2026 guide in Rhondda, tar and chip driveway work runs at about £43–£71 per m² including VAT, so a 200 m² drive is roughly £8,100–£13,550. Guide only; the survey confirms a fixed price.

What is included in a tar and chip driveway?

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Rolled to bed the stones in

Covering Rhondda

Survey cover and pricing for Rhondda. Rhondda sits under a mile from Rhondda, within our regular Mid Glamorgan cover.

Postcodes
CF43, CF41, CF42
Area
Mid Glamorgan
Nearest towns
Tonypandy (3 miles), Mountain Ash (3 miles), Aberdare (4 miles), Tonyrefail (5 miles)
Pricing
Wales, about 5% below our UK midpoint
Kerb approvals
The council

We also cover nearby Tonypandy, Mountain Ash, Aberdare, Tonyrefail, Pontypridd.

Do I need permission in Rhondda?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Any new or widened crossing over the pavement needs approval from the council as highway authority.

Your questions answered

How quickly can work start in Rhondda?

Often 1–3 days depending on base work. We book Rhondda surveys alongside other jobs in Mid Glamorgan, and give you dates once the specification is agreed.

Do you cover all of Rhondda?

We cover Rhondda including CF43, CF41, CF42, and nearby Tonypandy, Mountain Ash, Aberdare.

Can I get a free survey in Rhondda?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a tar and chip driveway in Rhondda?

In Wales, new front hardstanding should be porous or drain to a permeable area within the property, and work covering 100 m² or more with drainage effects usually needs SAB approval first. Dropped kerbs are approved by the council as highway authority.

More we do in Rhondda

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Rhondda.

Free survey for new surfacing

Tar and chip driveways in Rhondda: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price