Tar and chip driveways in Ross-on-Wye

What does a tar and chip driveway cost in Ross-on-Wye?

Guide prices below are for Ross-on-Wye, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£45–£75 per m²
Example: 50 m² drive	£2,250–£3,750
Example: 100 m² drive	£4,500–£7,500
Example: 200 m² drive	£8,550–£14,250

As a 2026 guide in Ross-on-Wye, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 200 m² drive is roughly £8,550–£14,250. Guide only; the survey confirms a fixed price.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Edges set with kerbs, setts or cobbles
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

The build-up we price

Ross-on-Wye: the local details

Survey cover and pricing for Ross-on-Wye. Smaller towns such as Ross-on-Wye are surveyed alongside nearby jobs in Herefordshire.

Postcodes: HR9, GL17
Area: Herefordshire
Nearest towns: Ledbury (10 miles), Hereford (12 miles), Leominster (23 miles)
Pricing: West Midlands, in line with our UK midpoint
Kerb approvals: The highway authority

The same service is available in Ledbury, Hereford, Leominster.

Do I need permission in Ross-on-Wye?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Questions about tar and chip driveways in Ross-on-Wye

Is the survey in Ross-on-Wye free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Ross-on-Wye?

Often 1–3 days depending on base work. We book Ross-on-Wye surveys alongside other jobs in Herefordshire, and give you dates once the specification is agreed.

What is the price of a tar and chip driveway in Ross-on-Wye?

As a 2026 guide in Ross-on-Wye, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 200 m² drive is roughly £8,550–£14,250. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Ross-on-Wye?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Other work in Ross-on-Wye

Ready for a price in Ross-on-Wye? Use the guide price tool or send the form, and we'll arrange a visit.