Tar and chip driveways in Leominster
For tar and chip driveways in Leominster, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

Tar and chip driveway prices in Leominster
For Leominster, we apply the West Midlands rate, in line with our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Tar and chip drive with a new sub-base | £45–£75 per m² |
| Example: 50 m² drive | £2,250–£3,750 |
| Example: 100 m² drive | £4,500–£7,500 |
| Example: 200 m² drive | £8,550–£14,250 |
As a 2026 guide in Leominster, tar and chip driveway work runs at about £45–£75 per m² including VAT, so a 50 m² drive is roughly £2,250–£3,750. Guide only; the survey confirms a fixed price.
Leominster: the local details
Survey cover and pricing for Leominster. Smaller towns such as Leominster are surveyed alongside nearby jobs in Herefordshire.
- Postcodes
- HR6
- Area
- Herefordshire
- Nearest towns
- Hereford (12 miles), Ledbury (19 miles), Ross-on-Wye (23 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Hereford, Ledbury, Ross-on-Wye.
Rules that apply in Leominster
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.
What is included in a tar and chip driveway?
Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.
- Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
- Edges set with kerbs, setts or cobbles
- Hot bitumen or emulsion sprayed evenly
- Chippings spread straight onto the binder
- Rolled to bed the stones in
How it is built
Leominster: common questions
Will someone visit before I get a fixed price in Leominster?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
How long does a tar and chip driveway take in Leominster?
Often 1–3 days depending on base work. We book Leominster surveys alongside other jobs in Herefordshire, and give you dates once the specification is agreed.
Do you cover all of Leominster?
We cover Leominster including HR6, and nearby Hereford, Ledbury, Ross-on-Wye.
Do I need permission for a tar and chip driveway in Leominster?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Also in Leominster
- New tarmac driveways
- Red tarmac driveways
- Permeable tarmac driveways
- Car park and yard repairs
- Tarmac driveway resurfacing
- Tarmac paths and footpaths
- Everything in Leominster
Tell us what you have in mind for Leominster and we'll book a survey and put the specification in writing.
Tar and chip driveways in Leominster: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED