Driveways and paths · Greater Manchester

Tar and chip driveways in Middleton

If you are weighing up tar and chip driveways in Middleton, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

MIDDLETON GUIDE£44–£73 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

What does a tar and chip driveway cost in Middleton?

Local guide rates for Middleton (the North West, about 3% below our UK midpoint):

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£44–£73 per m²
Example: 50 m² drive£2,200–£3,650
Example: 100 m² drive£4,350–£7,300
Example: 200 m² drive£8,300–£13,800

As a 2026 guide in Middleton, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Guide only; the survey confirms a fixed price.

Where we work in and around Middleton

What applies in Middleton. We reach Middleton on our Greater Manchester survey days; Manchester is 5 miles away.

Postcodes
M24, M9
Area
Greater Manchester
Nearest towns
Chadderton (2 miles), Heywood (3 miles), Royton (3 miles), Oldham (3 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

The same service is available in Chadderton, Heywood, Royton, Oldham, Failsworth.

Do I need permission in Middleton?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Loose surplus chippings swept up after a few days
  • Second coat where a double dressing is specified

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about tar and chip driveways in Middleton

What is the price of a tar and chip driveway in Middleton?

As a 2026 guide in Middleton, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Middleton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What approvals apply in Middleton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Middleton?

We cover Middleton including M24, M9, and nearby Chadderton, Heywood, Royton.

More we do in Middleton

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Middleton.

Free survey for new surfacing

Tar and chip driveways in Middleton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price