Tar and chip driveways in Failsworth

What does a tar and chip driveway cost in Failsworth?

For Failsworth, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£73 per m²
Example: 50 m² drive	£2,200–£3,650
Example: 100 m² drive	£4,350–£7,300
Example: 200 m² drive	£8,300–£13,800

As a 2026 guide in Failsworth, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Guide only; the survey confirms a fixed price.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

The build-up we price

Do I need permission in Failsworth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Where we work in and around Failsworth

The key facts for Failsworth. Smaller towns such as Failsworth are surveyed alongside nearby jobs in Greater Manchester.

Postcodes: M35, M40
Area: Greater Manchester
Nearest towns: Droylsden (2 miles), Ashton-under-Lyne (3 miles), Chadderton (3 miles), Oldham (3 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Droylsden, Ashton-under-Lyne, Chadderton, Oldham, Manchester.

Your questions answered

How long will the work take at my Failsworth property?

Often 1–3 days depending on base work. We book Failsworth surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

Do I need permission for a tar and chip driveway in Failsworth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a tar and chip driveway in Failsworth?

As a 2026 guide in Failsworth, tar and chip driveway work runs at about £44–£73 per m² including VAT, so a 200 m² drive is roughly £8,300–£13,800. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Failsworth free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Failsworth

Questions about tar and chip driveways in Failsworth? Call, WhatsApp or use the form, and we'll talk it through.