Driveways and paths · Greater Manchester

Red tarmac driveways in Failsworth

Every red tarmac driveway we price in Failsworth comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

FAILSWORTH GUIDE£73–£112 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

How much should I budget in Failsworth?

For Failsworth, we apply the North West rate, about 3% below our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£73–£112 per m²
Example: 30 m² drive£2,400–£3,700
Example: 50 m² drive£3,650–£5,600
Example: 80 m² drive£5,800–£8,900

As a 2026 guide in Failsworth, red tarmac driveway work runs at about £73–£112 per m² including VAT, so a 80 m² drive is roughly £5,800–£8,900. Guide only; the survey confirms a fixed price.

What the price covers

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Falls and drainage set as for any new drive

Rules that apply in Failsworth

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

How it is built

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Failsworth

What applies in Failsworth. We cover Failsworth by grouping surveys with nearby Greater Manchester jobs; Manchester is 3 miles away.

Postcodes
M35, M40
Area
Greater Manchester
Nearest towns
Droylsden (2 miles), Ashton-under-Lyne (3 miles), Chadderton (3 miles), Oldham (3 miles)
Pricing
North West, about 3% below our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Droylsden, Ashton-under-Lyne, Chadderton, Oldham, Manchester.

Your questions answered

Will someone visit before I get a fixed price in Failsworth?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Failsworth?

We cover Failsworth including M35, M40, and nearby Droylsden, Ashton-under-Lyne, Chadderton.

What approvals apply in Failsworth?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How long does a red tarmac driveway take in Failsworth?

Usually 2–4 working days. We book Failsworth surveys alongside other jobs in Greater Manchester, and give you dates once the specification is agreed.

More we do in Failsworth

Tell us what you have in mind for Failsworth and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Failsworth: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price