Tar and chip driveways in Edmonton

What does a tar and chip driveway cost in Edmonton?

For Edmonton, we apply the London rate, about 20% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£54–£90 per m²
Example: 50 m² drive	£2,700–£4,500
Example: 100 m² drive	£5,400–£9,000
Example: 200 m² drive	£10,250–£17,100

As a 2026 guide in Edmonton, tar and chip driveway work runs at about £54–£90 per m² including VAT, so a 100 m² drive is roughly £5,400–£9,000. Guide only; the survey confirms a fixed price.

Edmonton: the local details

Edmonton at a glance. We cover Edmonton as part of our regular Greater London rounds.

Postcodes: N9
Area: Greater London
Nearest towns: Tottenham (2 miles), Enfield (2 miles), Chingford (3 miles), Walthamstow (3 miles)
Pricing: London, about 20% above our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Tottenham, Enfield, Chingford, Walthamstow, Wood Green.

The build-up we price

Planning and kerb rules for Edmonton

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What we do on a tar and chip driveway

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
Chippings spread straight onto the binder
Rolled to bed the stones in
Loose surplus chippings swept up after a few days
Second coat where a double dressing is specified

Edmonton: common questions

How much does a tar and chip driveway cost in Edmonton?

As a 2026 guide in Edmonton, tar and chip driveway work runs at about £54–£90 per m² including VAT, so a 100 m² drive is roughly £5,400–£9,000. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a tar and chip driveway take in Edmonton?

Often 1–3 days depending on base work. We book Edmonton surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Do I need permission for a tar and chip driveway in Edmonton?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Is the survey in Edmonton free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Edmonton

Questions about tar and chip driveways in Edmonton? Call, WhatsApp or use the form, and we'll talk it through.