Driveways and paths · Greater London

New tarmac driveways in Edmonton

Planning a new tarmac driveway in Edmonton? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

EDMONTON GUIDE£72–£114 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

What does a new tarmac driveway cost in Edmonton?

These Edmonton guide prices reflect rates in London, about 20% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£72–£114 per m²
Example: 30 m² drive£2,400–£3,750
Example: 50 m² drive£3,600–£5,700
Example: 80 m² drive£5,750–£9,100

As a 2026 guide in Edmonton, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Guide only; the survey confirms a fixed price.

Rules that apply in Edmonton

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Edmonton: the local details

The key facts for Edmonton. As one of the larger towns in Greater London, Edmonton sees regular survey visits.

Postcodes
N9
Area
Greater London
Nearest towns
Tottenham (2 miles), Enfield (2 miles), Chingford (3 miles), Walthamstow (3 miles)
Pricing
London, about 20% above our UK midpoint
Kerb approvals
The highway authority

Close to Edmonton: Tottenham, Enfield, Chingford, Walthamstow, Wood Green.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Questions about new tarmac driveways in Edmonton

Do you cover all of Edmonton?

We cover Edmonton including N9, and nearby Tottenham, Enfield, Chingford.

New tarmac driveway cost in Edmonton: what should I budget?

As a 2026 guide in Edmonton, new tarmac driveway work runs at about £72–£114 per m² including VAT, so a 80 m² drive is roughly £5,750–£9,100. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Edmonton?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my Edmonton property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Edmonton surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

Other work in Edmonton

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Edmonton.

Free survey for new surfacing

New tarmac driveways in Edmonton: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price