Driveways and paths · Essex

Tar and chip driveways in Frinton-on-Sea

Planning a tar and chip driveway in Frinton-on-Sea? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

FRINTON-ON-SEA GUIDE£47–£79 per m² inc VAT
Tar and chip driveway with golden chippings leading to a country cottage, typical of tar and chip driveway work

Tar and chip driveway prices in Frinton-on-Sea

These Frinton-on-Sea guide prices reflect rates in the East of England, about 5% above our UK midpoint.

ItemGuide price (inc VAT)
Tar and chip drive with a new sub-base£47–£79 per m²
Example: 50 m² drive£2,350–£3,950
Example: 100 m² drive£4,700–£7,900
Example: 200 m² drive£9,000–£14,950

As a 2026 guide in Frinton-on-Sea, tar and chip driveway work runs at about £47–£79 per m² including VAT, so a 50 m² drive is roughly £2,350–£3,950. Guide only; the survey confirms a fixed price.

What the price covers

Hot bitumen sprayed and dressed with rolled stone chippings for a gravel look that stays put.

  • Base prepared: new MOT Type 1 sub-base, or an existing sound tarmac or stone base
  • Edges set with kerbs, setts or cobbles
  • Hot bitumen or emulsion sprayed evenly
  • Chippings spread straight onto the binder
  • Loose surplus chippings swept up after a few days

Do I need permission in Frinton-on-Sea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

The build-up we price

Dressingchippings rolled into bitumenBindersprayed bitumen or emulsionBaseMOT Type 1 or existing sound surfaceEdgeskerbs, setts or cobblesINDICATIVE CROSS-SECTION · NOT TO SCALE

Frinton-on-Sea: the local details

Survey cover and pricing for Frinton-on-Sea. Smaller towns such as Frinton-on-Sea are surveyed alongside nearby jobs in Essex.

Postcodes
CO13
Area
Essex
Nearest towns
Walton-on-the-Naze (2 miles), Clacton-on-Sea (5 miles), Harwich (8 miles), Felixstowe (10 miles)
Pricing
East of England, about 5% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Walton-on-the-Naze, Clacton-on-Sea, Harwich, Felixstowe, Colchester.

Your questions answered

Do I need permission for a tar and chip driveway in Frinton-on-Sea?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Frinton-on-Sea?

We cover Frinton-on-Sea including CO13, and nearby Walton-on-the-Naze, Clacton-on-Sea, Harwich.

Can I get a free survey in Frinton-on-Sea?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Frinton-on-Sea?

Often 1–3 days depending on base work. We book Frinton-on-Sea surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

Also in Frinton-on-Sea

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Frinton-on-Sea.

Free survey for new surfacing

Tar and chip driveways in Frinton-on-Sea: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price