New tarmac driveways in Frinton-on-Sea

What does a new tarmac driveway cost in Frinton-on-Sea?

Guide prices below are for Frinton-on-Sea, adjusted for the East of England, where surfacing rates run about 5% above our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£63–£100 per m²
Example: 30 m² drive	£2,100–£3,300
Example: 50 m² drive	£3,150–£5,000
Example: 80 m² drive	£5,050–£8,000

As a 2026 guide in Frinton-on-Sea, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Guide only; the survey confirms a fixed price.

Where we work in and around Frinton-on-Sea

Frinton-on-Sea at a glance. Frinton-on-Sea is covered on our Essex rounds, 30 miles from Southend-on-Sea.

Postcodes: CO13
Area: Essex
Nearest towns: Walton-on-the-Naze (2 miles), Clacton-on-Sea (5 miles), Harwich (8 miles), Felixstowe (10 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

Close to Frinton-on-Sea: Walton-on-the-Naze, Clacton-on-Sea, Harwich, Felixstowe, Colchester.

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Layer by layer

Do I need permission in Frinton-on-Sea?

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Frinton-on-Sea: common questions

How long will the work take at my Frinton-on-Sea property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Frinton-on-Sea surveys alongside other jobs in Essex, and give you dates once the specification is agreed.

How much does a new tarmac driveway cost in Frinton-on-Sea?

As a 2026 guide in Frinton-on-Sea, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Frinton-on-Sea free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you cover all of Frinton-on-Sea?

We cover Frinton-on-Sea including CO13, and nearby Walton-on-the-Naze, Clacton-on-Sea, Harwich.

Also in Frinton-on-Sea

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Frinton-on-Sea.