Tar and chip driveways in New Mills

Tar and chip driveway prices in New Mills

For New Mills, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Tar and chip drive with a new sub-base	£44–£74 per m²
Example: 50 m² drive	£2,200–£3,700
Example: 100 m² drive	£4,400–£7,350
Example: 200 m² drive	£8,400–£13,950

As a 2026 guide in New Mills, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Guide only; the survey confirms a fixed price.

Layer by layer

Covering New Mills

Survey cover and pricing for New Mills. We cover New Mills by grouping surveys with nearby Derbyshire jobs; Derby is 38 miles away.

Postcodes: SK22, SK23
Area: Derbyshire
Nearest towns: Hazel Grove (5 miles), Glossop (6 miles), Bredbury (6 miles), Hyde (7 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Hazel Grove, Glossop, Bredbury, Hyde, Bramhall.

What the price covers

Tar and chip, also called surface dressing, is a layer of bitumen sprayed onto a prepared base and immediately covered with stone chippings, which are rolled in so the surface looks like gravel but behaves like a bound drive.

Edges set with kerbs, setts or cobbles
Hot bitumen or emulsion sprayed evenly
Chippings spread straight onto the binder
Rolled to bed the stones in
Second coat where a double dressing is specified

Planning and kerb rules for New Mills

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about tar and chip driveways in New Mills

How much does a tar and chip driveway cost in New Mills?

As a 2026 guide in New Mills, tar and chip driveway work runs at about £44–£74 per m² including VAT, so a 200 m² drive is roughly £8,400–£13,950. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in New Mills free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long will the work take at my New Mills property?

Often 1–3 days depending on base work. We book New Mills surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

Do you cover all of New Mills?

We cover New Mills including SK22, SK23, and nearby Hazel Grove, Glossop, Bredbury.

Other work in New Mills

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for New Mills.