Driveways and paths · Renfrewshire and Inverclyde

Red tarmac driveways in Johnstone

If you are weighing up red tarmac driveways in Johnstone, the useful questions are about depth, edges and drainage. That's what our survey checks and what your quote spells out.

JOHNSTONE GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

Red tarmac driveway prices in Johnstone

Local guide rates for Johnstone (Scotland, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Johnstone, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 80 m² drive is roughly £5,900–£9,000. Guide only; the survey confirms a fixed price.

What is included in a red tarmac driveway?

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Black AC 20 binder course, about 50–60 mm
  • Red pigmented surface course, about 20–30 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Layer by layer

Surface course20–30 mm red pigmented AC 6Binder course50–60 mm black AC 20Sub-baseabout 150 mm MOT Type 1Edgescharcoal blocks or kerbsINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Johnstone

The key facts for Johnstone. Smaller towns such as Johnstone are surveyed alongside nearby jobs in Renfrewshire and Inverclyde.

Postcodes
PA5, PA10, PA9, PA6, PA11, PA12
Area
Renfrewshire and Inverclyde
Nearest towns
Paisley (3 miles), Barrhead (5 miles), Erskine (6 miles), Renfrew (6 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

Close to Johnstone: Paisley, Barrhead, Erskine, Renfrew, Clydebank.

Planning and kerb rules for Johnstone

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

Questions about red tarmac driveways in Johnstone

How long does a red tarmac driveway take in Johnstone?

Usually 2–4 working days. We book Johnstone surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

Do you cover all of Johnstone?

We cover Johnstone including PA5, PA10, PA9, PA6, PA11, PA12, and nearby Paisley, Barrhead, Erskine.

Will someone visit before I get a fixed price in Johnstone?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How much does a red tarmac driveway cost in Johnstone?

As a 2026 guide in Johnstone, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 80 m² drive is roughly £5,900–£9,000. Edging, drainage and a dropped kerb are priced separately where needed.

More we do in Johnstone

Questions about red tarmac driveways in Johnstone? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Red tarmac driveways in Johnstone: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price