Driveways and paths · Renfrewshire and Inverclyde

Permeable tarmac driveways in Johnstone

Permeable tarmac driveways in Johnstone start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

JOHNSTONE GUIDE£78–£122 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

What does a permeable tarmac driveway cost in Johnstone?

Local guide rates for Johnstone (Scotland, about 2% below our UK midpoint):

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£78–£122 per m²
Example: 30 m² drive£2,600–£4,050
Example: 50 m² drive£3,900–£6,100
Example: 80 m² drive£6,250–£9,800

As a 2026 guide in Johnstone, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Guide only; the survey confirms a fixed price.

What is included in a permeable tarmac driveway?

Open-graded porous asphalt on a deep permeable stone base, so rain soaks through on site.

  • Ground check: how fast does the soil drain?
  • Dig out deeper than a standard drive to fit the storage layer
  • Geotextile separating layer on the formation
  • Open-graded permeable sub-base, often Type 3 or 4/20 stone
  • Porous asphalt binder and surface courses

Where we work in and around Johnstone

The key facts for Johnstone. Johnstone is covered on our Renfrewshire and Inverclyde rounds, 3 miles from Paisley.

Postcodes
PA5, PA10, PA9, PA6, PA11, PA12
Area
Renfrewshire and Inverclyde
Nearest towns
Paisley (3 miles), Barrhead (5 miles), Erskine (6 miles), Renfrew (6 miles)
Pricing
Scotland, about 2% below our UK midpoint
Kerb approvals
The council

We also cover nearby Paisley, Barrhead, Erskine, Renfrew, Clydebank.

The build-up we price

Surface courseporous asphalt, open-gradedBinder courseporous asphalt baseStorage layeropen-graded Type 3 or 4/20 stone, depth to suitFormationgeotextile on the subsoilINDICATIVE CROSS-SECTION · NOT TO SCALE

Do I need permission in Johnstone?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. If the job needs a dropped kerb, the council as roads authority approves it before any work on the footway.

Your questions answered

Permeable tarmac driveway cost in Johnstone: what should I budget?

As a 2026 guide in Johnstone, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Edging, drainage and a dropped kerb are priced separately where needed.

How long does a permeable tarmac driveway take in Johnstone?

Usually 3–5 working days. We book Johnstone surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

Are there planning or highway rules in Johnstone?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

Will someone visit before I get a fixed price in Johnstone?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Johnstone

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Johnstone.

Free survey for new surfacing

Permeable tarmac driveways in Johnstone: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price