Red tarmac driveways in Ross-on-Wye
Red tarmac driveways in Ross-on-Wye start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

How much should I budget in Ross-on-Wye?
Guide prices below are for Ross-on-Wye, adjusted for the West Midlands, where surfacing rates run in line with our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Red tarmac drive, full dig-out and new sub-base | £75–£115 per m² |
| Example: 30 m² drive | £2,500–£3,800 |
| Example: 50 m² drive | £3,750–£5,750 |
| Example: 80 m² drive | £6,000–£9,200 |
As a 2026 guide in Ross-on-Wye, red tarmac driveway work runs at about £75–£115 per m² including VAT, so a 50 m² drive is roughly £3,750–£5,750. Guide only; the survey confirms a fixed price.
Do I need permission in Ross-on-Wye?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Covering Ross-on-Wye
Survey cover and pricing for Ross-on-Wye. We cover Ross-on-Wye by grouping surveys with nearby Herefordshire jobs; Hereford is 12 miles away.
- Postcodes
- HR9, GL17
- Area
- Herefordshire
- Nearest towns
- Ledbury (10 miles), Hereford (12 miles), Leominster (23 miles)
- Pricing
- West Midlands, in line with our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Ledbury, Hereford, Leominster.
What the price covers
Pigmented red asphalt on the same full build, often framed with a charcoal block border.
- Full dig-out and MOT Type 1 sub-base, about 150 mm
- Black AC 20 binder course, about 50–60 mm
- Red pigmented surface course, about 20–30 mm
- Colour sample discussed before ordering
- Falls and drainage set as for any new drive
How it is built
Questions about red tarmac driveways in Ross-on-Wye
How much does a red tarmac driveway cost in Ross-on-Wye?
As a 2026 guide in Ross-on-Wye, red tarmac driveway work runs at about £75–£115 per m² including VAT, so a 50 m² drive is roughly £3,750–£5,750. Edging, drainage and a dropped kerb are priced separately where needed.
Is the survey in Ross-on-Wye free?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Do I need permission for a red tarmac driveway in Ross-on-Wye?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Do you cover all of Ross-on-Wye?
We cover Ross-on-Wye including HR9, GL17, and nearby Ledbury, Hereford, Leominster.
Also in Ross-on-Wye
- New tarmac driveways
- Tar and chip driveways
- Permeable tarmac driveways
- Tarmac driveway resurfacing
- Tarmac paths and footpaths
- Car park resurfacing
- Everything in Ross-on-Wye
Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Ross-on-Wye.
Red tarmac driveways in Ross-on-Wye: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED