Driveways and paths · Derbyshire

Red tarmac driveways in Derby

Red tarmac driveways in Derby start with the parts you won't see: how deep the ground is dug, how much stone goes back in, and where the rain will run once the drive is sealed.

DERBY GUIDE£74–£113 per m² inc VAT
Red tarmac front driveway with a charcoal block edge outside a Victorian house, typical of red tarmac driveway work

What does a red tarmac driveway cost in Derby?

Guide prices below are for Derby, adjusted for the East Midlands, where surfacing rates run about 2% below our UK midpoint.

ItemGuide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base£74–£113 per m²
Example: 30 m² drive£2,450–£3,700
Example: 50 m² drive£3,700–£5,650
Example: 80 m² drive£5,900–£9,000

As a 2026 guide in Derby, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 30 m² drive is roughly £2,450–£3,700. Guide only; the survey confirms a fixed price.

What the price covers

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

  • Full dig-out and MOT Type 1 sub-base, about 150 mm
  • Black AC 20 binder course, about 50–60 mm
  • Contrasting block or kerb border as edge restraint
  • Colour sample discussed before ordering
  • Falls and drainage set as for any new drive

Where we work in and around Derby

The key facts for Derby. Derby is one of the bigger places we cover in Derbyshire, so survey slots come round regularly.

Postcodes
DE1, DE22, DE23, DE21, DE24, DE3, DE73
Area
Derbyshire
Nearest towns
Belper (7 miles), Ilkeston (8 miles), Heanor (8 miles), Ripley (8 miles)
Pricing
East Midlands, about 2% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Belper, Ilkeston, Heanor, Ripley, Long Eaton.

Do I need permission in Derby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Your questions answered

How long does a red tarmac driveway take in Derby?

Usually 2–4 working days. We book Derby surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

Do you work in my part of Derby?

We cover Derby including DE1, DE22, DE23, DE21, DE24, DE3, and nearby Belper, Ilkeston, Heanor.

Red tarmac driveway cost in Derby: what should I budget?

As a 2026 guide in Derby, red tarmac driveway work runs at about £74–£113 per m² including VAT, so a 30 m² drive is roughly £2,450–£3,700. Edging, drainage and a dropped kerb are priced separately where needed.

Are there planning or highway rules in Derby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Derby

Tell us what you have in mind for Derby and we'll book a survey and put the specification in writing.

Free survey for new surfacing

Red tarmac driveways in Derby: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price