New tarmac driveways in Derby

How much should I budget in Derby?

For Derby, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Derby, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Where we work in and around Derby

Derby at a glance. As one of the larger towns in Derbyshire, Derby sees regular survey visits.

Postcodes: DE1, DE22, DE23, DE21, DE24, DE3, DE73
Area: Derbyshire
Nearest towns: Belper (7 miles), Ilkeston (8 miles), Heanor (8 miles), Ripley (8 miles)
Pricing: East Midlands, about 2% below our UK midpoint
Kerb approvals: The highway authority

Nearby, we work in Belper, Ilkeston, Heanor, Ripley, Long Eaton.

Rules that apply in Derby

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

What we do on a new tarmac driveway

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Falls set so water runs to a channel, gully or soft landscaping

Questions about new tarmac driveways in Derby

Which Derby postcodes do you cover?

We cover Derby including DE1, DE22, DE23, DE21, DE24, DE3, and nearby Belper, Ilkeston, Heanor.

How much does a new tarmac driveway cost in Derby?

As a 2026 guide in Derby, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Derby?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How quickly can work start in Derby?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Derby surveys alongside other jobs in Derbyshire, and give you dates once the specification is agreed.

Also in Derby

Ready for a price in Derby? Use the guide price tool or send the form, and we'll arrange a visit.