Red tarmac driveways in Billingham

Red tarmac driveway prices in Billingham

Local guide rates for Billingham (the North East, about 7% below our UK midpoint):

Item	Guide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base	£70–£107 per m²
Example: 30 m² drive	£2,300–£3,550
Example: 50 m² drive	£3,500–£5,350
Example: 80 m² drive	£5,600–£8,550

As a 2026 guide in Billingham, red tarmac driveway work runs at about £70–£107 per m² including VAT, so a 50 m² drive is roughly £3,500–£5,350. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Billingham

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Where we work in and around Billingham

Billingham at a glance. We reach Billingham on our County Durham survey days; Darlington is 11 miles away.

Postcodes: TS20, TS23, TS22
Area: County Durham
Nearest towns: Stockton-on-Tees (2 miles), Middlesbrough (2 miles), Thornaby (4 miles), Yarm (6 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

The same service is available in Stockton-on-Tees, Middlesbrough, Thornaby, Yarm, Hartlepool.

What we do on a red tarmac driveway

Red tarmac is ordinary asphalt with a red pigment, and often red aggregate, in the surface course, laid on the same sub-base and binder course as a black tarmac drive.

Full dig-out and MOT Type 1 sub-base, about 150 mm
Black AC 20 binder course, about 50–60 mm
Red pigmented surface course, about 20–30 mm
Contrasting block or kerb border as edge restraint
Falls and drainage set as for any new drive

How it is built

Your questions answered

Are there planning or highway rules in Billingham?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

What is the price of a red tarmac driveway in Billingham?

As a 2026 guide in Billingham, red tarmac driveway work runs at about £70–£107 per m² including VAT, so a 50 m² drive is roughly £3,500–£5,350. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Billingham?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How long does a red tarmac driveway take in Billingham?

Usually 2–4 working days. We book Billingham surveys alongside other jobs in County Durham, and give you dates once the specification is agreed.

Other work in Billingham

Ready for a price in Billingham? Use the guide price tool or send the form, and we'll arrange a visit.