Permeable tarmac driveways in Batley
For permeable tarmac driveways in Batley, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

Permeable tarmac driveway prices in Batley
These Batley guide prices reflect rates in Yorkshire and the Humber, about 4% below our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| Porous asphalt drive on a permeable stone base | £77–£120 per m² |
| Example: 30 m² drive | £2,550–£3,950 |
| Example: 50 m² drive | £3,850–£6,000 |
| Example: 80 m² drive | £6,150–£9,600 |
As a 2026 guide in Batley, permeable tarmac driveway work runs at about £77–£120 per m² including VAT, so a 30 m² drive is roughly £2,550–£3,950. Guide only; the survey confirms a fixed price.
What the price covers
A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.
- Geotextile separating layer on the formation
- Open-graded permeable sub-base, often Type 3 or 4/20 stone
- Porous asphalt binder and surface courses
- Overflow to a soakaway or border on slow-draining ground
- Edge restraint that does not block the flow
Layer by layer
Planning and kerb rules for Batley
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
Covering Batley
The key facts for Batley. Batley is 7 miles from Leeds, and we survey there as part of West Yorkshire cover.
- Postcodes
- WF17
- Area
- West Yorkshire
- Nearest towns
- Dewsbury (1 mile), Heckmondwike (2 miles), Liversedge (2 miles), Ossett (3 miles)
- Pricing
- Yorkshire and the Humber, about 4% below our UK midpoint
- Kerb approvals
- The highway authority
Close to Batley: Dewsbury, Heckmondwike, Liversedge, Ossett, Morley.
Your questions answered
Can I get a free survey in Batley?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
What approvals apply in Batley?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
What is the price of a permeable tarmac driveway in Batley?
As a 2026 guide in Batley, permeable tarmac driveway work runs at about £77–£120 per m² including VAT, so a 30 m² drive is roughly £2,550–£3,950. Edging, drainage and a dropped kerb are priced separately where needed.
Which Batley postcodes do you cover?
We cover Batley including WF17, and nearby Dewsbury, Heckmondwike, Liversedge.
Other work in Batley
- Red tarmac driveways
- Tarmac driveway resurfacing
- Private and access road surfacing
- Tar and chip driveways
- New tarmac driveways
- Car park and yard repairs
- Everything in Batley
Ready for a price in Batley? Use the guide price tool or send the form, and we'll arrange a visit.
Permeable tarmac driveways in Batley: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED