Driveways and paths · Tyne and Wear

Permeable tarmac driveways in Washington

Every permeable tarmac driveway we price in Washington comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

WASHINGTON GUIDE£74–£116 per m² inc VAT
Porous asphalt driveway draining after rain with no standing water, typical of permeable tarmac driveway work

How much should I budget in Washington?

Local guide rates for Washington (the North East, about 7% below our UK midpoint):

ItemGuide price (inc VAT)
Porous asphalt drive on a permeable stone base£74–£116 per m²
Example: 30 m² drive£2,450–£3,850
Example: 50 m² drive£3,700–£5,800
Example: 80 m² drive£5,950–£9,300

As a 2026 guide in Washington, permeable tarmac driveway work runs at about £74–£116 per m² including VAT, so a 30 m² drive is roughly £2,450–£3,850. Guide only; the survey confirms a fixed price.

The build-up we price

Surface courseporous asphalt, open-gradedBinder courseporous asphalt baseStorage layeropen-graded Type 3 or 4/20 stone, depth to suitFormationgeotextile on the subsoilINDICATIVE CROSS-SECTION · NOT TO SCALE

What the price covers

Open-graded porous asphalt on a deep permeable stone base, so rain soaks through on site.

  • Ground check: how fast does the soil drain?
  • Geotextile separating layer on the formation
  • Porous asphalt binder and surface courses
  • Overflow to a soakaway or border on slow-draining ground
  • Edge restraint that does not block the flow

Planning and kerb rules for Washington

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Where we work in and around Washington

What applies in Washington. Washington is 6 miles from Newcastle upon Tyne, and we survey there as part of Tyne and Wear cover.

Postcodes
NE38, NE37
Area
Tyne and Wear
Nearest towns
Chester-le-Street (4 miles), Felling (4 miles), Houghton-le-Spring (5 miles), Hebburn (5 miles)
Pricing
North East, about 7% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Chester-le-Street, Felling, Houghton-le-Spring, Hebburn, Sunderland.

Questions about permeable tarmac driveways in Washington

Permeable tarmac driveway cost in Washington: what should I budget?

As a 2026 guide in Washington, permeable tarmac driveway work runs at about £74–£116 per m² including VAT, so a 30 m² drive is roughly £2,450–£3,850. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Washington?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do I need permission for a permeable tarmac driveway in Washington?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Which Washington postcodes do you cover?

We cover Washington including NE38, NE37, and nearby Chester-le-Street, Felling, Houghton-le-Spring.

Other work in Washington

Questions about permeable tarmac driveways in Washington? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

Permeable tarmac driveways in Washington: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price