Red tarmac driveways in Washington

What does a red tarmac driveway cost in Washington?

Local guide rates for Washington (the North East, about 7% below our UK midpoint):

Item	Guide price (inc VAT)
Red tarmac drive, full dig-out and new sub-base	£70–£107 per m²
Example: 30 m² drive	£2,300–£3,550
Example: 50 m² drive	£3,500–£5,350
Example: 80 m² drive	£5,600–£8,550

As a 2026 guide in Washington, red tarmac driveway work runs at about £70–£107 per m² including VAT, so a 80 m² drive is roughly £5,600–£8,550. Guide only; the survey confirms a fixed price.

Rules that apply in Washington

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Covering Washington

Survey cover and pricing for Washington. Washington sits 6 miles from Newcastle upon Tyne, within our regular Tyne and Wear cover.

Postcodes: NE38, NE37
Area: Tyne and Wear
Nearest towns: Chester-le-Street (4 miles), Felling (4 miles), Houghton-le-Spring (5 miles), Hebburn (5 miles)
Pricing: North East, about 7% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Chester-le-Street, Felling, Houghton-le-Spring, Hebburn, Sunderland.

What the price covers

Pigmented red asphalt on the same full build, often framed with a charcoal block border.

Black AC 20 binder course, about 50–60 mm
Red pigmented surface course, about 20–30 mm
Contrasting block or kerb border as edge restraint
Colour sample discussed before ordering
Falls and drainage set as for any new drive

Washington: common questions

What approvals apply in Washington?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a red tarmac driveway cost in Washington?

As a 2026 guide in Washington, red tarmac driveway work runs at about £70–£107 per m² including VAT, so a 80 m² drive is roughly £5,600–£8,550. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Washington?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Washington?

We cover Washington including NE38, NE37, and nearby Chester-le-Street, Felling, Houghton-le-Spring.

More we do in Washington

Ready for a price in Washington? Use the guide price tool or send the form, and we'll arrange a visit.