Permeable tarmac driveways in Newark-on-Trent
A good permeable tarmac driveway in Newark-on-Trent looks the same as a poor one on the day it is laid. The difference shows a few winters later, which is why our quotes list what goes underneath.

What does a permeable tarmac driveway cost in Newark-on-Trent?
For Newark-on-Trent, we apply the East Midlands rate, about 2% below our UK midpoint. Your survey turns these ranges into a fixed price.
| Item | Guide price (inc VAT) |
|---|---|
| Porous asphalt drive on a permeable stone base | £78–£122 per m² |
| Example: 30 m² drive | £2,600–£4,050 |
| Example: 50 m² drive | £3,900–£6,100 |
| Example: 80 m² drive | £6,250–£9,800 |
As a 2026 guide in Newark-on-Trent, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Guide only; the survey confirms a fixed price.
Where we work in and around Newark-on-Trent
Newark-on-Trent at a glance. Newark-on-Trent is 16 miles from Nottingham, and we survey there as part of Nottinghamshire cover.
- Postcodes
- NG24, NG23
- Area
- Nottinghamshire
- Nearest towns
- Arnold (14 miles), Nottingham (16 miles), West Bridgford (16 miles), Hucknall (16 miles)
- Pricing
- East Midlands, about 2% below our UK midpoint
- Kerb approvals
- The highway authority
The same service is available in Arnold, Nottingham, West Bridgford, Hucknall, Mansfield.
Do I need permission in Newark-on-Trent?
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
What we do on a permeable tarmac driveway
A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.
- Ground check: how fast does the soil drain?
- Dig out deeper than a standard drive to fit the storage layer
- Geotextile separating layer on the formation
- Porous asphalt binder and surface courses
- Edge restraint that does not block the flow
Questions about permeable tarmac driveways in Newark-on-Trent
Can I get a free survey in Newark-on-Trent?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Are there planning or highway rules in Newark-on-Trent?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How long does a permeable tarmac driveway take in Newark-on-Trent?
Usually 3–5 working days. We book Newark-on-Trent surveys alongside other jobs in Nottinghamshire, and give you dates once the specification is agreed.
How much does a permeable tarmac driveway cost in Newark-on-Trent?
As a 2026 guide in Newark-on-Trent, permeable tarmac driveway work runs at about £78–£122 per m² including VAT, so a 30 m² drive is roughly £2,600–£4,050. Edging, drainage and a dropped kerb are priced separately where needed.
More we do in Newark-on-Trent
- Front garden to tarmac driveway
- Tarmac driveway repairs
- Car park surfacing
- Car park resurfacing
- Red tarmac driveways
- Car park and yard repairs
- Everything in Newark-on-Trent
Ready for a price in Newark-on-Trent? Use the guide price tool or send the form, and we'll arrange a visit.
Permeable tarmac driveways in Newark-on-Trent: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED