Permeable tarmac driveways in Barking

How much should I budget in Barking?

Guide prices below are for Barking, adjusted for London, where surfacing rates run about 20% above our UK midpoint.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£96–£150 per m²
Example: 30 m² drive	£3,150–£4,950
Example: 50 m² drive	£4,800–£7,500
Example: 80 m² drive	£7,700–£12,000

As a 2026 guide in Barking, permeable tarmac driveway work runs at about £96–£150 per m² including VAT, so a 50 m² drive is roughly £4,800–£7,500. Guide only; the survey confirms a fixed price.

Covering Barking

Barking at a glance. Barking is one of the bigger places we cover in Greater London, so survey slots come round regularly.

Postcodes: IG11, E6
Area: Greater London
Nearest towns: Ilford (2 miles), Thamesmead (3 miles), Canning Town (3 miles), Stratford (4 miles)
Pricing: London, about 20% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Ilford, Thamesmead, Canning Town, Stratford, Dagenham.

What the price covers

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Ground check: how fast does the soil drain?
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Porous asphalt binder and surface courses
Overflow to a soakaway or border on slow-draining ground
Edge restraint that does not block the flow

Layer by layer

Planning and kerb rules for Barking

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

Questions about permeable tarmac driveways in Barking

Permeable tarmac driveway cost in Barking: what should I budget?

As a 2026 guide in Barking, permeable tarmac driveway work runs at about £96–£150 per m² including VAT, so a 50 m² drive is roughly £4,800–£7,500. Edging, drainage and a dropped kerb are priced separately where needed.

Can I get a free survey in Barking?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Which Barking postcodes do you cover?

We cover Barking including IG11, E6, and nearby Ilford, Thamesmead, Canning Town.

How quickly can work start in Barking?

Usually 3–5 working days. We book Barking surveys alongside other jobs in Greater London, and give you dates once the specification is agreed.

More we do in Barking

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Barking.