Permeable tarmac driveways in Crewe

Permeable tarmac driveway prices in Crewe

Guide prices below are for Crewe, adjusted for the North West, where surfacing rates run about 3% below our UK midpoint.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£78–£121 per m²
Example: 30 m² drive	£2,550–£4,000
Example: 50 m² drive	£3,900–£6,050
Example: 80 m² drive	£6,200–£9,700

As a 2026 guide in Crewe, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,050. Guide only; the survey confirms a fixed price.

What is included in a permeable tarmac driveway?

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Ground check: how fast does the soil drain?
Geotextile separating layer on the formation
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Overflow to a soakaway or border on slow-draining ground
Edge restraint that does not block the flow

How it is built

Covering Crewe

What applies in Crewe. As one of the larger towns in Cheshire, Crewe sees regular survey visits.

Postcodes: CW1, CW2
Area: Cheshire
Nearest towns: Nantwich (4 miles), Sandbach (5 miles), Winsford (7 miles), Kidsgrove (8 miles)
Pricing: North West, about 3% below our UK midpoint
Kerb approvals: The highway authority

We also cover nearby Nantwich, Sandbach, Winsford, Kidsgrove, Congleton.

Rules that apply in Crewe

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Crewe: common questions

Are there planning or highway rules in Crewe?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

How much does a permeable tarmac driveway cost in Crewe?

As a 2026 guide in Crewe, permeable tarmac driveway work runs at about £78–£121 per m² including VAT, so a 50 m² drive is roughly £3,900–£6,050. Edging, drainage and a dropped kerb are priced separately where needed.

Will someone visit before I get a fixed price in Crewe?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Do you work in my part of Crewe?

We cover Crewe including CW1, CW2, and nearby Nantwich, Sandbach, Winsford.

Also in Crewe

Ready for a price in Crewe? Use the guide price tool or send the form, and we'll arrange a visit.