Permeable tarmac driveways in Biggleswade

What does a permeable tarmac driveway cost in Biggleswade?

For Biggleswade, we apply the East of England rate, about 5% above our UK midpoint. Your survey turns these ranges into a fixed price.

Item	Guide price (inc VAT)
Porous asphalt drive on a permeable stone base	£84–£131 per m²
Example: 30 m² drive	£2,750–£4,350
Example: 50 m² drive	£4,200–£6,550
Example: 80 m² drive	£6,700–£10,500

As a 2026 guide in Biggleswade, permeable tarmac driveway work runs at about £84–£131 per m² including VAT, so a 80 m² drive is roughly £6,700–£10,500. Guide only; the survey confirms a fixed price.

Planning and kerb rules for Biggleswade

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What the price covers

A permeable tarmac drive uses porous asphalt, a mix with fewer fine particles so water passes through the gaps, laid on an open-graded stone base that stores the rain and lets it soak into the ground.

Ground check: how fast does the soil drain?
Open-graded permeable sub-base, often Type 3 or 4/20 stone
Porous asphalt binder and surface courses
Overflow to a soakaway or border on slow-draining ground
Edge restraint that does not block the flow

Covering Biggleswade

The key facts for Biggleswade. Biggleswade is covered on our Bedfordshire rounds, 16 miles from Luton.

Postcodes: SG18, SG19, SG17
Area: Bedfordshire
Nearest towns: Letchworth Garden City (8 miles), St Neots (9 miles), Bedford (9 miles), Hitchin (10 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Letchworth Garden City, St Neots, Bedford, Hitchin, Kempston.

Biggleswade: common questions

Do I need permission for a permeable tarmac driveway in Biggleswade?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Will someone visit before I get a fixed price in Biggleswade?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

How quickly can work start in Biggleswade?

Usually 3–5 working days. We book Biggleswade surveys alongside other jobs in Bedfordshire, and give you dates once the specification is agreed.

Do you cover all of Biggleswade?

We cover Biggleswade including SG18, SG19, SG17, and nearby Letchworth Garden City, St Neots, Bedford.

Also in Biggleswade

Ready for a price in Biggleswade? Use the guide price tool or send the form, and we'll arrange a visit.