New tarmac driveways in Biggleswade

New tarmac driveway prices in Biggleswade

Local guide rates for Biggleswade (the East of England, about 5% above our UK midpoint):

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£63–£100 per m²
Example: 30 m² drive	£2,100–£3,300
Example: 50 m² drive	£3,150–£5,000
Example: 80 m² drive	£5,050–£8,000

As a 2026 guide in Biggleswade, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Guide only; the survey confirms a fixed price.

Biggleswade: the local details

Biggleswade at a glance. Smaller towns such as Biggleswade are surveyed alongside nearby jobs in Bedfordshire.

Postcodes: SG18, SG19, SG17
Area: Bedfordshire
Nearest towns: Letchworth Garden City (8 miles), St Neots (9 miles), Bedford (9 miles), Hitchin (10 miles)
Pricing: East of England, about 5% above our UK midpoint
Kerb approvals: The highway authority

The same service is available in Letchworth Garden City, St Neots, Bedford, Hitchin, Kempston.

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

Break out and remove the old surface and spoil
Dig to formation level, usually around 230–250 mm below finished height
Geotextile membrane where the ground is soft or clay
Concrete-haunched kerbs or a block-paved border as edge restraint
Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Layer by layer

Rules that apply in Biggleswade

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).

Your questions answered

What approvals apply in Biggleswade?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Can I get a free survey in Biggleswade?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

What is the price of a new tarmac driveway in Biggleswade?

As a 2026 guide in Biggleswade, new tarmac driveway work runs at about £63–£100 per m² including VAT, so a 30 m² drive is roughly £2,100–£3,300. Edging, drainage and a dropped kerb are priced separately where needed.

Do you work in my part of Biggleswade?

We cover Biggleswade including SG18, SG19, SG17, and nearby Letchworth Garden City, St Neots, Bedford.

Also in Biggleswade

Ready for a price in Biggleswade? Use the guide price tool or send the form, and we'll arrange a visit.