New tarmac driveways in Trowbridge
Planning a new tarmac driveway in Trowbridge? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

How much should I budget in Trowbridge?
These Trowbridge guide prices reflect rates in the South West, about 3% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £62–£98 per m² |
| Example: 30 m² drive | £2,050–£3,250 |
| Example: 50 m² drive | £3,100–£4,900 |
| Example: 80 m² drive | £4,950–£7,850 |
As a 2026 guide in Trowbridge, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 80 m² drive is roughly £4,950–£7,850. Guide only; the survey confirms a fixed price.
Layer by layer
Covering Trowbridge
What applies in Trowbridge. Trowbridge sits 25 miles from Swindon, within our regular Wiltshire cover.
- Postcodes
- BA14, BA15
- Area
- Wiltshire
- Nearest towns
- Westbury (4 miles), Melksham (5 miles), Bath (8 miles), Frome (8 miles)
- Pricing
- South West, about 3% above our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Westbury, Melksham, Bath, Frome, Warminster.
What is included in a new tarmac driveway?
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Dig to formation level, usually around 230–250 mm below finished height
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
- Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
- Falls set so water runs to a channel, gully or soft landscaping
Planning and kerb rules for Trowbridge
In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).
Trowbridge: common questions
How quickly can work start in Trowbridge?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Trowbridge surveys alongside other jobs in Wiltshire, and give you dates once the specification is agreed.
What is the price of a new tarmac driveway in Trowbridge?
As a 2026 guide in Trowbridge, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 80 m² drive is roughly £4,950–£7,850. Edging, drainage and a dropped kerb are priced separately where needed.
What approvals apply in Trowbridge?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
Will someone visit before I get a fixed price in Trowbridge?
Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.
Other work in Trowbridge
- Tarmac driveway resurfacing
- Private and access road surfacing
- Permeable tarmac driveways
- Tar and chip driveways
- Front garden to tarmac driveway
- Red tarmac driveways
- Everything in Trowbridge
Tell us what you have in mind for Trowbridge and we'll book a survey and put the specification in writing.
New tarmac driveways in Trowbridge: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED