Driveways and paths · Somerset

New tarmac driveways in Frome

For new tarmac driveways in Frome, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

FROME GUIDE£62–£98 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

New tarmac driveway prices in Frome

These Frome guide prices reflect rates in the South West, about 3% above our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£62–£98 per m²
Example: 30 m² drive£2,050–£3,250
Example: 50 m² drive£3,100–£4,900
Example: 80 m² drive£4,950–£7,850

As a 2026 guide in Frome, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 50 m² drive is roughly £3,100–£4,900. Guide only; the survey confirms a fixed price.

Covering Frome

What applies in Frome. Frome is covered on our Somerset rounds, 10 miles from Bath.

Postcodes
BA11
Area
Somerset
Nearest towns
Westbury (6 miles), Warminster (6 miles), Trowbridge (8 miles), Bath (10 miles)
Pricing
South West, about 3% above our UK midpoint
Kerb approvals
The highway authority

Nearby, we work in Westbury, Warminster, Trowbridge, Bath, Keynsham.

Do I need permission in Frome?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

What the price covers

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Dig to formation level, usually around 230–250 mm below finished height
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled

Questions about new tarmac driveways in Frome

Which Frome postcodes do you cover?

We cover Frome including BA11, and nearby Westbury, Warminster, Trowbridge.

What is the price of a new tarmac driveway in Frome?

As a 2026 guide in Frome, new tarmac driveway work runs at about £62–£98 per m² including VAT, so a 50 m² drive is roughly £3,100–£4,900. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Frome free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Are there planning or highway rules in Frome?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Also in Frome

Questions about new tarmac driveways in Frome? Call, WhatsApp or use the form, and we'll talk it through.

Free survey for new surfacing

New tarmac driveways in Frome: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price