New tarmac driveways in Reigate
Planning a new tarmac driveway in Reigate? We'll measure up, look at the edges and drainage, and set the specification out in writing before you commit to anything.

New tarmac driveway prices in Reigate
Guide prices below are for Reigate, adjusted for the South East, where surfacing rates run about 10% above our UK midpoint.
| Item | Guide price (inc VAT) |
|---|---|
| New black tarmac drive, full dig-out and new sub-base | £66–£105 per m² |
| Example: 30 m² drive | £2,200–£3,450 |
| Example: 50 m² drive | £3,300–£5,250 |
| Example: 80 m² drive | £5,300–£8,350 |
As a 2026 guide in Reigate, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Guide only; the survey confirms a fixed price.
Where we work in and around Reigate
Survey cover and pricing for Reigate. We cover Reigate by grouping surveys with nearby Surrey jobs; Woking is 16 miles away.
- Postcodes
- RH2
- Area
- Surrey
- Nearest towns
- Redhill (2 miles), Horley (5 miles), Dorking (6 miles), Banstead (6 miles)
- Pricing
- South East, about 10% above our UK midpoint
- Kerb approvals
- The highway authority
Nearby, we work in Redhill, Horley, Dorking, Banstead, Caterham.
Rules that apply in Reigate
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Any new or widened crossing over the pavement needs approval from the highway authority (the county or unitary council).
What we do on a new tarmac driveway
A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.
- Break out and remove the old surface and spoil
- Geotextile membrane where the ground is soft or clay
- MOT Type 1 sub-base laid and compacted in layers, about 150 mm
- Concrete-haunched kerbs or a block-paved border as edge restraint
- Falls set so water runs to a channel, gully or soft landscaping
The build-up we price
Reigate: common questions
What approvals apply in Reigate?
In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).
How quickly can work start in Reigate?
Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Reigate surveys alongside other jobs in Surrey, and give you dates once the specification is agreed.
How much does a new tarmac driveway cost in Reigate?
As a 2026 guide in Reigate, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 50 m² drive is roughly £3,300–£5,250. Edging, drainage and a dropped kerb are priced separately where needed.
Which Reigate postcodes do you cover?
We cover Reigate including RH2, and nearby Redhill, Horley, Dorking.
More we do in Reigate
- Front garden to tarmac driveway
- Private and access road surfacing
- Car park surfacing
- Tarmac paths and footpaths
- Car park resurfacing
- Tarmac driveway resurfacing
- Everything in Reigate
Ready for a price in Reigate? Use the guide price tool or send the form, and we'll arrange a visit.
New tarmac driveways in Reigate: get a written quote
Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.
- Surface courseDEPTH + MIX
- Binder courseDEPTH + MIX
- Sub-baseDEPTH + MATERIAL
- Edges, drainage, VATITEMISED