Driveways and paths · Surrey

New tarmac driveways in Horley

Every new tarmac driveway we price in Horley comes with a written specification, so the dig depth, sub-base, binder course and surface course are on paper before anything is agreed.

HORLEY GUIDE£66–£105 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Horley?

For Horley, we apply the South East rate, about 10% above our UK midpoint. Your survey turns these ranges into a fixed price.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£66–£105 per m²
Example: 30 m² drive£2,200–£3,450
Example: 50 m² drive£3,300–£5,250
Example: 80 m² drive£5,300–£8,350

As a 2026 guide in Horley, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 80 m² drive is roughly £5,300–£8,350. Guide only; the survey confirms a fixed price.

Where we work in and around Horley

Survey cover and pricing for Horley. Smaller towns such as Horley are surveyed alongside nearby jobs in Surrey.

Postcodes
RH6
Area
Surrey
Nearest towns
Crawley (4 miles), Redhill (5 miles), Reigate (5 miles), East Grinstead (7 miles)
Pricing
South East, about 10% above our UK midpoint
Kerb approvals
The highway authority

The same service is available in Crawley, Redhill, Reigate, East Grinstead, Caterham.

Planning and kerb rules for Horley

In England, householder permitted development (Class F of the 2015 General Permitted Development Order) lets you lay a hard surface in front of a house without planning permission if it is porous, or if the rainwater is directed to a permeable area within the property. If the area is more than 5 m² and neither applies, you need permission. Standard dense tarmac is not porous, so a dense tarmac drive needs a lawn, border, channel to a soakaway or other permeable route for its water. A vehicle crossing over the footway is a separate approval, from the highway authority (the county or unitary council).

The build-up we price

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

What we do on a new tarmac driveway

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Dig to formation level, usually around 230–250 mm below finished height
  • Geotextile membrane where the ground is soft or clay
  • Concrete-haunched kerbs or a block-paved border as edge restraint
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled

Horley: common questions

New tarmac driveway cost in Horley: what should I budget?

As a 2026 guide in Horley, new tarmac driveway work runs at about £66–£105 per m² including VAT, so a 80 m² drive is roughly £5,300–£8,350. Edging, drainage and a dropped kerb are priced separately where needed.

What approvals apply in Horley?

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. Dropped kerbs are approved by the highway authority (the county or unitary council).

Do you work in my part of Horley?

We cover Horley including RH6, and nearby Crawley, Redhill, Reigate.

Will someone visit before I get a fixed price in Horley?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Horley

Ready for a price in Horley? Use the guide price tool or send the form, and we'll arrange a visit.

Free survey for new surfacing

New tarmac driveways in Horley: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price