Driveways and paths · South Yorkshire

New tarmac driveways in Dinnington

For new tarmac driveways in Dinnington, we measure the area, check the ground and the falls, and give you an itemised price you can compare line by line with any other quote.

DINNINGTON GUIDE£58–£91 per m² inc VAT
Wide new tarmac driveway with granite sett border leading to a garage, typical of new tarmac driveway work

How much should I budget in Dinnington?

Guide prices below are for Dinnington, adjusted for Yorkshire and the Humber, where surfacing rates run about 4% below our UK midpoint.

ItemGuide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base£58–£91 per m²
Example: 30 m² drive£1,900–£3,000
Example: 50 m² drive£2,900–£4,550
Example: 80 m² drive£4,600–£7,300

As a 2026 guide in Dinnington, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,550. Guide only; the survey confirms a fixed price.

Layer by layer

Surface course20–30 mm AC 6 denseBinder course50–60 mm AC 20 denseSub-baseabout 150 mm MOT Type 1Edgeskerbs or blocks on a concrete haunchINDICATIVE CROSS-SECTION · NOT TO SCALE

Covering Dinnington

Survey cover and pricing for Dinnington. Smaller towns such as Dinnington are surveyed alongside nearby jobs in South Yorkshire.

Postcodes
S25, S26
Area
South Yorkshire
Nearest towns
Maltby (3 miles), Worksop (5 miles), Rotherham (8 miles), Conisbrough (8 miles)
Pricing
Yorkshire and the Humber, about 4% below our UK midpoint
Kerb approvals
The highway authority

We also cover nearby Maltby, Worksop, Rotherham, Conisbrough, Rawmarsh.

What is included in a new tarmac driveway?

A new tarmac driveway is built from the ground up: the old surface and soil are dug out, a compacted stone sub-base is laid, then a hot binder course and a finer surface course are spread and rolled, and the edges are held by kerbs or blocks.

  • Break out and remove the old surface and spoil
  • Geotextile membrane where the ground is soft or clay
  • MOT Type 1 sub-base laid and compacted in layers, about 150 mm
  • Binder course (AC 20 dense), about 50–60 mm, laid hot and rolled
  • Falls set so water runs to a channel, gully or soft landscaping

Planning and kerb rules for Dinnington

In England, a new hard surface over 5 m² in front of a house needs planning permission unless it is porous or drains to a lawn, border or soakaway within the property. If the job needs a dropped kerb, the highway authority (the county or unitary council) approves it before any work on the footway.

Your questions answered

How long will the work take at my Dinnington property?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Dinnington surveys alongside other jobs in South Yorkshire, and give you dates once the specification is agreed.

How much does a new tarmac driveway cost in Dinnington?

As a 2026 guide in Dinnington, new tarmac driveway work runs at about £58–£91 per m² including VAT, so a 50 m² drive is roughly £2,900–£4,550. Edging, drainage and a dropped kerb are priced separately where needed.

Do you cover all of Dinnington?

We cover Dinnington including S25, S26, and nearby Maltby, Worksop, Rotherham.

Will someone visit before I get a fixed price in Dinnington?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

More we do in Dinnington

Send us a postcode, a rough size and a photo or two, and we'll come back with survey dates for Dinnington.

Free survey for new surfacing

New tarmac driveways in Dinnington: get a written quote

Send a postcode and a rough size and we'll arrange a survey. Every quote lists the layers, edging, drainage and VAT.

  • Surface courseDEPTH + MIX
  • Binder courseDEPTH + MIX
  • Sub-baseDEPTH + MATERIAL
  • Edges, drainage, VATITEMISED
Call nowGet a price