New tarmac driveways in Clarkston

What does a new tarmac driveway cost in Clarkston?

These Clarkston guide prices reflect rates in Scotland, about 2% below our UK midpoint.

Item	Guide price (inc VAT)
New black tarmac drive, full dig-out and new sub-base	£59–£93 per m²
Example: 30 m² drive	£1,950–£3,050
Example: 50 m² drive	£2,950–£4,650
Example: 80 m² drive	£4,700–£7,450

As a 2026 guide in Clarkston, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Guide only; the survey confirms a fixed price.

Do I need permission in Clarkston?

In Scotland, permitted development allows a hard surface between a house and a road only if it is porous or the water drains to a porous area within the property. Unlike England there is no 5 m² allowance, so it applies to any size. Conservation areas and the grounds of listed buildings have extra restrictions. The council, as roads authority, controls any new or widened access across a footway.

What is included in a new tarmac driveway?

Full dig-out, compacted stone sub-base, binder course and a fine surface course, edged and drained.

Geotextile membrane where the ground is soft or clay
MOT Type 1 sub-base laid and compacted in layers, about 150 mm
Concrete-haunched kerbs or a block-paved border as edge restraint
Surface course (AC 6 dense), about 20–30 mm, laid hot and rolled
Falls set so water runs to a channel, gully or soft landscaping

Where we work in and around Clarkston

The key facts for Clarkston. Clarkston is covered on our Renfrewshire and Inverclyde rounds, 7 miles from Paisley.

Postcodes: G76
Area: Renfrewshire and Inverclyde
Nearest towns: Giffnock (1 mile), Newton Mearns (2 miles), Rutherglen (4 miles), East Kilbride (4 miles)
Pricing: Scotland, about 2% below our UK midpoint
Kerb approvals: The council

Nearby, we work in Giffnock, Newton Mearns, Rutherglen, East Kilbride, Barrhead.

Layer by layer

Questions about new tarmac driveways in Clarkston

Do I need permission for a new tarmac driveway in Clarkston?

In Scotland, a hard surface between the house and a road is permitted development only if it is porous or drains to a porous area within the property, whatever its size. Dropped kerbs are approved by the council as roads authority.

How quickly can work start in Clarkston?

Usually 2–4 working days for a typical drive, longer with drainage or a dropped kerb. We book Clarkston surveys alongside other jobs in Renfrewshire and Inverclyde, and give you dates once the specification is agreed.

What is the price of a new tarmac driveway in Clarkston?

As a 2026 guide in Clarkston, new tarmac driveway work runs at about £59–£93 per m² including VAT, so a 80 m² drive is roughly £4,700–£7,450. Edging, drainage and a dropped kerb are priced separately where needed.

Is the survey in Clarkston free?

Yes for new surfacing such as drives, paths, private roads and car parks. Small repairs are often priced from photos; if a visit is needed for a repair-only job, we tell you any charge first.

Also in Clarkston

Questions about new tarmac driveways in Clarkston? Call, WhatsApp or use the form, and we'll talk it through.